Shanghai Fortune Alloy Co.,Ltd
Model NO.: IGT-1/IGT-2/IGT-3/IGT-4/IGT-5/IGT-6
HS Code: 84249090
Alloy ceramic powder
In the plasma beam cladding technology, plasma power, cladding process, and alloy powder is three important factors decisive of final quality, in which, it is essential for the components and ratio of powder, the cost performance of which is limited factor of promoting plasma cladding technology. Therefore, it has been our tackling key problem to find a kind of "broad-spectrum" alloy ceramic powder applicable for many kinds of base materials. Through our continuous research and repeated test, we have developed the alloy powder with good hardness and toughness, and which can also be widely used in plain carbon steel, alloy steel, high manganese steel etc. simultaneously we have developed the super hard powder for some special purposes, high temperature resistant powder, strong shock resistant powder for crusher hammer. Every kind of powder products are carefully studied, repeated analysis experimented, striving for science, refined and validity.
|IGT-1||50~200μm||A stainless steel+||35-40HRC||Using for repairing&strengthening of valve sealing surface, hot roll,etc.|
|IGT-2||50~200μm||Cr-Mn-Si-Mo+||50-55HRC||Using for repairing&strengthening of drill pipe, the broken roller, roller compaction roller|
|IGT-3||50~200μm||Cr-B-Si-Ni+||59-66HRC||Using for repairing&strengthening of cut tooth end, all kinds of middle trough.|
|IGT-5||50~200μm||Cr-B-Si-RE+||58-65HRC||Using for repairing&strengthening of various middle trough, the head and tail of scraper blade,etc.|
|IGT-6||50~200μm||Cr-B-Si-Mo-Ni-RE+||60-68HRC||Using for repairing&strengthening of various middle trough, the head and tail of scraper blade,etc.|
Copyright © Shanghai Fortune Alloy Co.,Ltd All Rights Reserved.